Ghost Immobiliser Fitter
Ghost immobilisers are one of the most effective methods to protect your vehicle from thieves. They stop vehicles from starting unless the proper pin code is entered. They can be used to track vehicles remotely. They are becoming more popular and many insurance companies offer discounts to drivers who have these systems installed.
It is tamper-proof
The Ghost Immobiliser is a sophisticated security device that stops your vehicle from starting until the unique PIN code is entered or a beacon is present. The system is completely discreet and can be customised to match your vehicle, making it a highly effective anti-theft solution. After installation, it's important to test the system to make sure that it is working correctly. Entering the PIN and starting the engine is an easy way to check that the system is installed correctly. Regular testing can help you identify any issues or issues with the system early.
The system communicates directly with the ECU and will not allow your vehicle to start until you have entered the correct sequence. This can be done using the electronic buttons located on your steering wheel or by using an app that you can download on your smartphone. The tamper-proof design and the low profile make it difficult for thieves to locate or remove. It can be used combination with a beacon for keeping track of the location of your car. It's a great way to protect vehicles that have been modified, or cars that are costly or are rare.
This tamper-proof device makes use of the buttons on your steering wheel to generate an exclusive sequence that only you know. The sequence is mathematically impossible for thieves to guess, and it can be easily changed with a secure reset key. It can be installed by a technician in most vehicles.
After installing the device, you will be required to connect it to a power source as well as a grounding point. Obtain the wiring diagram for your vehicle to identify the wires required. To prevent short circuits or electrical damage, insulate all connections using heat-shrink tubing or insulation. Check the mounting of the device as well as its connections to ensure there isn't any indication of altering the connections.
Ghost 2 can be set up in Service/Valet mode for older vehicles that require battery isolation during servicing or maintenance. This will disable the device by using an unique pin code. This will stop it from being turned off again by thieves.
It's wireless.
In contrast to other anti-theft devices ghost immobilisers work silently and cannot be identified by thieves. They can be installed in various vehicles to protect them from hacking, key cloning, and signal relay attacks. They also connect to the CAN network and can be used to monitor a vehicle remotely. They can even send owners immediate notifications when their vehicle is stolen. It is one of the most effective ways to protect your car from theft and some insurance companies offer discounts to those who have these devices installed.
The Ghost II immobiliser is an affordable and simple solution to keep your car safe from theft. It is wireless and compatible with the majority of automobiles. It is weatherproof, tamper-proof and is compatible with any vehicle. It also comes with a 3-year warranty. The Ghost II is unlike other security devices because it doesn't require additional wiring or other external components. Its unique pin code sequence protects your car from key cloning and theft by blocking the engine from starting without a disarm code is entered. The sequence can vary from one to 20 buttons, which means thieves will need to invest much more time trying to break the code before they are able to leave.
Another advantage of the Ghost II is its ability to block signals from a thief's key fob. It will detect when the key fob is stolen or hacked, and then disable the engine with an alarm. It also stops the use of a signal relay device, which is commonly employed by organized car-thief groups to gain access to a vehicle.
It is important to regularly test the Ghost Immobiliser to make sure that it's functioning as intended. This will allow you to identify any problems early and correct them before they become serious. It is an excellent idea to test the system by entering the PIN code and then starting the engine as part of your routine vehicle checks.
It is crucial that the immobiliser is placed in a location that is difficult to access by thieves. If possible, conceal the unit behind the dash by using cable ties. Also, ensure that all connections are insulated and not exposed to manipulation by thieves. Verify that the mount is secured.
It can be used with many vehicles.
The ghost immobiliser can be a very effective security device to protect your car from theft. It works by preventing your vehicle from starting until you enter the correct pin code. The code can be generated by pressing the buttons on the steering wheel, door panel, or on the centre console. The immobiliser is reprogrammable at any time by the owner. It is tamper-proof. It also protects from hacking, key-cloning and other nefarious activities.
While some drivers may attempt to install the Ghost Immobiliser themselves but it is recommended you work with an expert. This is because the process of installation is complicated, and mistakes could render the device ineffective or even damage your vehicle. Additionally, a DIY installation could void warranties for both the Ghost Immobiliser and your vehicle.
The best way to start is by obtaining the wiring diagram for your car model. This will give you a guideline for locating the CAN H and L wires, which are connections to the immobiliser. Mark these wires once you have located them, to ensure they don't be accidentally disconnected during installation. Also, make sure you choose a safe and reliable grounding point for your system.
It is a good practice to test the immobiliser after the wires have been connected to ensure that everything is functioning properly. Enter the PIN code and start your engine to see whether everything is working. It is also a good idea to test the immobiliser on a regular basis to ensure it functions as intended.
Another advantage of the ghost immobiliser is that it doesn't require any LED indicators or key fobs, and can be disarmed by pressing a distinct sequence of buttons on your steering wheel, door panel, or centre console. The immobiliser will leave no trace of its installation, which makes it difficult for thieves to locate. In addition, it can be used to increase the security of your vehicle in the event of a burglary, and is recommended by a variety of insurance companies.
Easy to install
The Ghost immobiliser, which is a sophisticated device, keeps your vehicle secure even from the most skilled thieves. It stops your car from starting until a unique PIN or sequence is entered along with the key fob. This prevents cloning or hacking and even key theft. Thieves can't drive your car away. It employs a variety of sensors to detect attempts to drive away and alerts the owner or the police in the event of altering.
Installing a ghost immobiliser can be a challenge, especially for those with no experience in installing alarms or other security systems. Utilizing the proper equipment and materials is essential to a successful installation. A multimeter is helpful for verifying electrical values. Insulation cables and cable ties are also useful for protecting connections. The user's manual for Ghost immobiliser offers specific instructions specifically tailored to the model of your vehicle and wiring.
During the installation process it is important to double-check the locations of the CAN H and CAN L wires to ensure the accuracy. They are crucial to power the immobiliser. Errors could lead to improper functionality or system failure. It is also important to mark the wires using a piece of tape or labels to track them. In addition, you must identify an unambiguous source of 12V power as well as an earthing point.
Once you've located the correct location, it's time to start assembling the ghost immobiliser. To avoid short circuits or a mistaken airbag deployment, you'll have to disconnect your battery first. The next step is to connect the wires. Follow the steps in the manual to ensure that the installation is clean and secure.
After you have completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. It will be a challenge for thieves to steal the device, as the device is directly connected to the engine control unit. ghost immobiliser problems can't remove or disable it. It's also tamper-proof, and the only way to disable it is by entering a personal pin code. The pin code is only available to the car's owner and the installer.
You can also use Ghost immobiliser to temporarily allow someone else to drive your vehicle, for instance when you're away on business or require service. This feature is called Service/Valet mode and you can enable it with an app for mobile devices or the key fob.